OUR SERVICE

Quality Control

1.Mould design control
    We can provide product analysis and Mouldflow report, will feedback customers with the issue arising on the product drawing

2. Mould material control
        Steel supplier are requested to provide steel quality guarantee certificate and steel certificate, we will do steel inspection before acceptance.

Contacts

SOLIDCO MOULD CO.,LTD is a comprehensive Plastic Injection Moulds Suppliers

Technical details in brief:
– Thermoplastics
– Photopolymers
– Metalscommunication solutions
– Urethanes

Mould Making Process

Original design:

 Hot runner with 6 valve gates, from the fill process, we can see hesitation on the top center. And there are weld lines on the main surface.

  • Product Traceability
  • Full Lifecycle tracing
  • Process data-logging
  • Production Management

Solution

 No.1 opened first, when the melt front reached the No.2&3 gates, No.2&3 opened, then the No.4&5 opened, in this mode ,the top side may filled before the under side.
  • Material Analysis
  • Performance & Safety
  • Mechanical & Environmental
  • Operational Testing

Automated Line

Although the runner is unbalanced, but we can control the time of the valve gates to decrease the influence of the unbalanced flow. And the 4 gates on the top side can give a good compensation for shrinkage.

  • Multiple Batches
  • Small Lot Size
  • Split-use, Modular
  • High Efficiency

Work shop&Equipment

Raw material

×