There are several methods to clean mould. One method involves cleaning it with vinegar and water solution. Vinegar is an effective way to remove mould because it attacks the fungi mechanically. You can also use vinegar to clean slightly moulded clothes. However, you must remember to use protective gear to avoid getting too much exposure to the acidic solution. Moreover, the cleaning solution should be applied in an area with good ventilation. The following are some tips for cleaning mould.
The most common and effective method for mould cleaning is to use hydrogen peroxide solution. Apply this solution on the affected area and leave it for 15 minutes to work. Then, you can remove it using a Scotch-Brite sponge. Once the mould has been removed, make sure to dry the affected area with a microfiber cloth. Using sunlight to remove mould is also not advisable as it will release the spores that spread throughout the air.
As mentioned, mould is a result of moisture. You can find mould in various places, such as your kitchen, bathroom, window sills, and even in your basement. If you find it in one of these places, the first thing to do is to get rid of it. If you find mould on your clothes, you should wash them on a hot cycle. Some of them may not be washable. Therefore, you should separate them.
If you can’t wash your soft furnishings, you can have them professionally cleaned or thrown away. In addition, the best way to control mould is to find the source of the moisture. It is best to make sure that your home is well ventilated to avoid the formation of new mould. Wear non-porous gloves to prevent skin irritation. And don’t forget to keep an eye out for any signs of water damage. If you’re not sure how to remove mould, you can try the tips below.
The first method involves using 3% hydrogen peroxide solution on the affected areas. Higher concentrations of hydrogen peroxide are available for cleaning various types of mould, but the 3% solution will work best for most cases. Also, hydrogen peroxide does not have any smell, which makes it difficult to tell if you breathe in too much of it. Therefore, it’s crucial to work in a well-ventilated area when using hydrogen peroxide to clean mould.
Another method involves mixing 2/3 white vinegar with two tsp baking soda and two cups of hot water. Applying this solution to the affected areas will kill the spores and prevent the mould from returning. Then, allow the solution to dry completely. The smell should disappear in a few hours. If the solution does not work, you may have to repeat the process. If the mould is still present, you should use a non-toxic product.
There are several ways to treat mould, but the most effective solution will be to follow a proven method. You can try chemical solutions found in supermarkets, but you should also consider hiring professionals. First, you should know where the moisture source is. Secondly, you should buy specialist equipment. And, of course, don’t be afraid to call for professional help if you’re not confident about your own abilities to handle mouldy materials. And, remember, you should always wear protective clothing when handling the affected area.
