/
Cavity layout. The number of cavities and their arrangement are determined based on the geometric structure characteristics of the plastic part, dimensional accuracy requirements, batch
Integrated hinge Product logos are generally placed on the flat inner surface of the product in a raised form. Choosing a surface where the normal
When starting the design of each injection molded product, the mold opening direction and parting line must first be determined to ensure that the core-pulling
Prior confirmation and preliminary settings in mold Manual operating parameter correction Correction of semi-automatic operating parameters a. The molded products will not be whitened, cracked
Silver Streaks Definition When plastics are disturbed by gas during the mold filling process, silver streaks or tiny bubbles often appear on the surface of
Flash Definition Flash, also known as overflow, etc, mostly occurs at the opening and closing positions of the mold, such as: the parting surface of
Copyright © 2025. All Rights Reserved.
