实心模具

With the needs of society, the requirements of moulds are getting higher and higher. In order to achieve high-speed processing of mould cavities and related parts, their relative machine tools must have three major characteristics. In this way, the mould can be matched well and used more reasonably. 1. Because the mould is developing in […]

In order to prevent early failure of the mould and effectively extend the service life of the mould, corresponding preventive measures are mainly taken from the following aspects. 1. Mould material.Since the cold work mould bears a large unit extrusion force, high-performance mould materials with high strength, good toughness and good wear resistance should be

The structure of precision stamping molds is related to the accuracy and quality of precision stamping parts, but we often overlook the safety of stamping molds. Safety is also an issue that we must consider when designing stamping molds. The following is a summary of some of the design safety issues used in molds. 1. First

The quick die change system is composed of a clamper, a lifter, a shifting arm, a pneumatic pump combination and an electronically controlled operation box. Widely used in punching machines, injection moulding machines, die casting machines and hydraulic presses. The rapid die change system can significantly shorten the installation and setting time of the punching

Mould protectors are used in production lines or assembly lines to perform part identification, sorting or error correction tasks to help you automate production. The mould protector is used for quality management. The standard samples of each product can be archived and stored in the controller. The quality inspector can compare the current product with

There are more and more applications of abrasive steel. When manufacturing moulds, the mould steel must meet some working conditions, such as hardness, strength, wear resistance and sufficient toughness. Only the working conditions that meet the mould requirements are met. The mould can be used as a tool for the workpiece. Which mould steel performance

There are two main purposes for polishing the mould. One is to increase the brightness of the plastic mould and make it beautiful. The second is to make the mould easy to demould. In the polishing process, the surface of the machined mould cavity is generally roughened with coarse oil stone, and the tool marks

The failure of the stamping die has a close relationship with the resistance to congestion. The durability of the stamping die after working for a period of time, the working size is lost due to frequent wear and tear, and the technical conditions of the part can no longer be met. It is determined according

Different die materials have different strength, toughness and wear resistance. Under certain conditions, the use of * materials can improve the durability several times. For example, the watt-hour meter magnetic pole punching die made of T10A steel has much shorter primary grinding life than the similar die made of Cr12 and Cr12MoV. The average grinding

In order to ensure the quality of the workpiece, the quality of mould manufacturing must be improved, and high-quality moulds can be better used. To improve the quality of mould manufacturing, the following four aspects must be improved. 1.Improve the processing accuracy of the mould parts.The geometry of the working parts of the mould parts,

The so-called part processing accuracy refers to the degree of conformity between the actual geometric parameters (such as size, shape and position) of the part and the ideal geometric parameters after processing. The part processing accuracy includes dimensional accuracy, shape accuracy and position accuracy. Therefore, we must pay attention to the precision of the mechanics

In order to make any damage or abnormality after the injection moulding of the plastic mould, we need to carry out certain specifications for the injection moulding of the mould, and its main requirements meet the following six conditions: 1. mould closing pressure: In principle, it should be greater than the total pressure of the