Industrial

In the pharmaceutical production process, the mould for tableting plays a vital role in the quality of the tablet. For example, the hole of the die becomes large, causing the unevenness of the punching filler to cause the difference in the weight of the tablet to not conform to the regulations or to produce a […]

How to reasonably choose the material of cold deformation mould and proper heat treatment to improve the service life of the mould is a very important issue in production. The normal failure of cold deformation mould should be wear, slight plastic deformation and fatigue failure. However, in actual production, in addition to wear and failure,

In the storage of equipment, it should be noted that the workshop mechanics need to remove the outer packaging after receiving it, remove the anti-rust oil and then clean and disinfect it with 95% ethanol before storing it in the mould for storage. The sheet placement area is clearly marked. Before using the tablet press

The tablet press is a kind of health care product processing equipment, and is suitable for tablet-shaped health care product tableting. According to the industry, tablet press moulds play a vital role in the quality of products in the production of tablet-type health products. For example, the hole of the die becomes large, causing unevenness

When you choose to clean mould, you are choosing to do something that can have a negative impact on the environment and may even cause problems with fire. For this reason, it is essential that anyone who wants to clean moulds or remove them completely is fully aware of the potential dangers and health consequences of

Pallet Mould manufacturers are the ones that manufacture plastic trays and other items such as pallets. They have the ability to manufacture trays and other items based on your specifications. They can design a plastic mould that is exactly the right size for whatever you have in mind. They can even design a tray based on

The most common type of plastic used for manufacturing toys and other consumer products is polyethylene. However, there are many more plastic injection moulds suppliers available for you to choose from. Many of the manufacturers can produce plastic parts in a variety of different sizes and shapes that will fit together perfectly to form the final product.

Hand basin moulding refers to hand basin construction where the hand basin is formed by filling a basin, usually with sand, with molten sand and pouring it over a hand-shaped mould into a cavity at the bottom of the basin. After it cools, the mould is removed and the hand basin is cut out to the

A Bucket Injection Mould is used in the production of polymer parts as well as in the cooling, heating and deformation of metal. A bucket injection mold uses a high pressure spray that is forced through the binder in a feed line. The feed line has many bends and sections, which allow for the different stages of

To make plastic injection moulds, it is important to choose the right tool steel. Some of these are more difficult to process than others, and some are made from metal. You can shorten your production cycle by choosing a less expensive metal. But to make a successful mould, you need to select the right tool