Author name: 实心模具

Injection moulding of Plastic Injection Moulds is a processing method used in mass production of certain shapes and complex parts.Of course, the functions of various parts of the mould are different.We divide the injection mould into the following parts. Introduce the components of the injection mould in detail. I. moulded parts. Its function is to make the search […]

As the main tool for the manufacture of workpieces, moulds are becoming more and more accurate for mould processing due to the increase in demand precision. l. Processing of glue flow groove: In the past, the processing of the oil seal mould flow glue groove has not been fully paid attention to. The glue flow groove

Nowadays, hot runner moulds are widely used. Not only can they save raw materials, but also reduce the discharge of waste products and improve the production of product quality. The use characteristics of hot runner moulds are described in detail below. 1. Shorten the moulding cycle Because there is no limit to the cooling time

Quality problems will seriously affect the performance of the extrusion die and the production of related workpieces. Therefore, when the extrusion die is in production, it is necessary to pay attention to the factors that affect its quality problems, so as to prevent the produced workpieces from being used normally. First,Quality of casting materials: Because

(1) Metallurgical quality Metallurgical quality has a great influence on the performance of die steel. Only with good metallurgical quality can the various properties of die steel be fully utilized. Metallurgical quality generally includes the following aspects: smelting quality, rolling and forging process performance, heat treatment and finishing performance, thermal conductivity and the degree of

1. Advantages (1) Metal parts with complex shapes, clear outlines, thin-walled deep cavities can be manufactured. Because molten metal maintains high fluidity under high pressure and high speed, it is possible to obtain metal parts that are difficult to process by other processing methods. (2) The dimensional accuracy of die castings is relatively high, up to IT11-13,

Casting can be divided into gravity casting and pressure casting according to the pouring process of molten metal. Gravity casting refers to the process of injecting molten metal into a mould under the action of the earth’s gravity, also called casting. The generalized gravity casting includes sand casting, metal casting, investment casting, lost foam casting,

The quality of the materials used will directly affect the performance of the mold development and use, so we need to pay attention to the main points when selecting mold materials, so as to avoid the mold does not meet the requirements and cannot be used normally, or the quality of the developed workpiece will

During the use of the Plastic Injection Molds, it is necessary to adopt a certain production line according to the production requirements or technical requirements. Sometimes when some details are not paid attention to, many factors will cause the instability of the mold, which will seriously affect the use of the mold manufacturing workpiece. Therefore, we

Springs account for a very small proportion of the total cost of the mould. Trying to save costs on the springs may cause premature failure of the springs, increase maintenance costs, reduce productivity, make you waste more time and labor costs, and even damage the mould And cause greater losses. How can we ensure the use