实心模具

When repairing the mold, we must pay attention to some matters, because the die-casting mold is a very expensive special precision machine, so any failures cannot occur again during the repair. 1. It is all about cleaning up the metal sculpts and deposits in all parts of the mold to show the true color of […]

In order for the mold to have a reasonable service life, we need to pay attention to some problems when using the new mold, so that it will not cause the early damage of the mold. What problems should we pay attention to when using the new mold? The main attention should be paid to

Common defects in the quality of nickel-tungsten coatings are more pitting, rough coatings on the side and spherical surfaces with white particles, severe unevenness between the central coating and side, corners and R, and even micro cracks at the corners and R. 1. pitting Pockmarks are tiny white and black dot-like defects on the coating.

1. As molds are developing in the direction of large-scale, molds of several tons to dozens of tons are very common, so the machine tool table must be able to bear heavy weight, which requires the equipment to have large load-bearing and high rigidity characteristics, and it must have enough The large table size and working

Mold repair requires professionally trained and qualified mold repairers to repair. Mold technical standards must be known during repair. For example, die-casting molds are very expensive and special precision machinery. They must be very confident. Not only mold repairers must be skilled Technology, meticulous style, and a serious and responsible spirit. So let’s explain the

The service life of the cold stamping die is relatively short. The reason is that there are many forms and reasons that affect the service life of the cold stamping die. Among them, the main ones are fracture, deformation, wear, and gnawing. The following is the specific situation: fracture The convex and concave molds of

Durability has a close relationship with the use of the die. If the durability is not good, it will cause the die to be damaged early and cannot be used normally. Therefore, when using a die, we must understand what factors will affect the durability of the die, which can not only improve The performance

There are two main purposes of polishing the mold. One is to increase the brightness and appearance of the plastic mold. The second is to make the mold easy to demold. When polishing, rough oilstone is generally used to roughen the surface of the machined mold cavity to remove the knife marks of the machine

In the process of mold processing, what annoys you most is some common defects, these defects will directly lead to the performance of the workpiece, and even make the workpiece unable to be used here, so we must try to avoid some defects when we are processing the mold , Here are seven magic weapons

Injection mold is a tool for producing plastic products. In order to meet the needs of molded parts, we need to pay attention to some things when choosing injection molds and put forward corresponding requirements. The following six requirements need to be met to choose a more suitable injection mold. 1. High corrosion resistance. Many

There are often failures in the use of molds. Starting from the actual situation, we will focus on several failure methods. There are mainly the following five types: plastic deformation failure; wear failure; fatigue failure; cold and heat fatigue failure; failure under the influence of comprehensive factors. (1) Plastic deformation failure The main reason is

1. Methods to prevent quenching cracks (1) Reasonably design the shape of parts. Try to use equal wall thickness design to avoid sudden changes in cross-sectional shape: ①Don’t make parts with large wall thicknesses into one piece, but use a mosaic structure so that each piece has the same strength as possible; ②The thick parts